Accessories

The CRS-15.2 uses two different insert rings to install bearing races on the 1.5-inch and 1-1/4-inch forks. The bearing surface is spared a direct hit by using aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm. - SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40.

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

The Tailwind aerodynamic panniers blend form with function, reducing drag and battery consumption by up to 6% when tested against competitors. Their low-bulk, clean-lined design delivers increased stability with a sleek aesthetic, creating a modern storage solution that lets you go further, faster, without compromising on what you carry. - 17 L capacity for all your gear, whether you're going downtown or way out of town. - Approx. dimensions (mm): 400 x 330 x 142mm (height/width/depth). - Klickfix mounting system lets you load the bags on and off your bike quickly for easy transitions, freeing up the top of the rack for additional carrying. - Compatible with all standard racks and all racks on Specialized bikes. - Sleek, water-resistant design sheds rain so your stuff stays dry when the weather gets nasty. - Unique right- and left-sided design delivers optimal aerodynamics for increased efficiency. - Internal laptop sleeve carries your computer snug and safe (laptops up to 17" screen). - 360-degree reflective graphics help drivers see you coming. - Freestanding shape for accessible loading and unloading.

Take your ride up a notch with the Front Rack and Adventure Plate combo. These Specialized e-bike accessories give you an extra carrying platform to carry up to 10kg on the front end of your Turbo Vado, Como, or Tero. The front rack system for the bike was designed thoughtfully for elegant integration at the front of your bike, and it features meaningful compatibility for carrying what you want, how you want to. - Compatible with Turbo Vado, Como, and Tero. - Mounts to compatible bikes via the headtube interface. - Optional MIK compatibility when the plate is removed. - Seamless integration of front light mount. - Max. Load 10kg. - Retailer installation is recommended.

The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.

The E-Bike Orbis StVZO E600 is an advanced StVZO certified e-bike cycling front light delivering 600 lumens of output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 13W Daytime Running Lights. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 600 lumens - StVZO-Optimized lens - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 13W DRL - Versatile E-bike system compatibility - 130cm power cable with BES3 BOSCH connector included

- Rugged 6061 aluminum construction is corrosion resistant - 100mm mudflaps provide ultimate coverage and are double-riveted for durability - Hardware is all stainless-steel and pre-installed for hassle-free mounting - V-stays for added stability - Disc brake compatible - 50mm width - Release Tabs on front fender for added safety - Meets EN test standards

Topeak's MTX TrunkBag DX boasts an expandable main compartment to carry all the gear you need. It's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately). - Capacity 12.3 L / 750 ci - Compartments 1 Divided main compartmetn, two side zippered pockets, Multi-expanding top compartment - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 36 x 25 x 21.5-29 cm / 14.2” x 9.8” x 8.5”~11.4” - Weight: 985 g / 2.17 lb

Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls

Specifications & Features: - 8/10 security rating - 14mm hardened MAX-PERFORMANCE STEEL SHACKLE - 3 STAINLESS STEEL KEYS — including new key design and one LED REPLACEABLE KEY FOB - Patent-pending HARDENED DOUBLE DEADBOLT design gives additional protection against twist attacks - NEW SMALLER CROSSBAR DESIGN - HIGHER SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - Key Safe Program - Product dimensions: 4” x 9” (10.2cm x 22.9cm) - Product weight: 3.50 lbs. (1.59kgs)

From daily commute to weekend ride, the CatEye AirGPS is ideal for anyone who wants to measure time, speed and distance. Simply click through to a different data field and transfer your ride data to your Smartphone via App to upload to supported platforms. - Sensorless GPS computer - Simple setup via smartphone app - 3-row display. Middle and lower row display programmable by smartphone. - Backlight (Night mode) - Hassle-free operation. ClickTec™ button interface, and automatically saves ride data by powering off. - 10hrs runtime - Stores up to 80 hours worth of route recording - Import ride data to Cateye Cycling™ and view it on app

- Adventure ready saddle mounted removable drybag and holster system - Includes waterproof carry bag with air release valve to keep gear dry and compact - Bag easily slides in and out of holster without having to remove from bicycle - 15L measures 19.7

The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets

Shaped to fit modern bicycle geometries, providing low-profile, swingfree storage that won’t adversely affect handling. Soft-lined pocket keeps your phone handy, and incorporated keychain and clip offer quick access to keys. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Water-resistant stitched construction. - Webbing ladder offers endless fastening points. Simply cut the supplied Velcro to size. - 6 Velcro, trim-to-length straps included. - Dual-sided zipper access. Main compartment for larger objects on the left, and a convenience pocket for storing phone, keys and wallet on the right. - Zippers close towards the front, keeping things neat and tidy when running lighting systems. - Soft-lined phone pocket is large enough to hold most modern phones, and doubles as a sunglass pocket. - Keychain clip (bonus keychain included). - Shape allows for use of waterbottles. - Volume 3.5L / 214 cu/in - Weight 170g / 0.37 lbs - Dimensions 46x11x6cm / 18.1”x 4.3”x2.4”

- The Basil Navigator Waterproof features a roll-top closure with an additional adjustable hook. - Thanks to the handle and shoulder strap, you can easily take the bag anywhere. - Waterproof (IPX 3). - Includes a reflective elastic front pocket.

Engineered for road cyclists seeking serious power, the ultra-sleek Dash Pro™ 600 headlight and Hotrod™ 50 tail light combo set delivers superior lighting with exceptional brightness and clarity. Fire up an intense 600 lumens forward and 50 lumens backwards to maximize your line of sight. Not only limited to night, the Dash Pro™ and Hotrod™ both feature DayLightning® mode with lightning-like flashes to make you stand out in broad daylight. Lay it all out on any road with the performance and features packed into this combo light set. (patent pending) Dash Pro™ 600 USB: - Powerful 600 lumen output with 8 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® - DayLightning® - Quad LED Steady - Quad LED Flashing) - SteadyPulse® mode alerts night time motorists with pulses while constantly lighting your path - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Low profile, water-resistant design only weighs 95 grams - Side illumination ports highlight your presence to nearby motorists - Versatite™ flexible mount conveniently attaches to most handlebars including aero bars Hotrod™ 50 USB: - Powerful 50 lumen red tail light with 6 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (High - Low - SteadyPulse® - Low Flash - DayLightning® - Zoom) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - Continuous array of LEDs work in unison to illuminate an extra wide and powerful glow - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Ultra low profile, water-resistant design only weighs 29 grams - Versatite™ flexible mount conveniently attaches to most seat posts and seat stays including aero styles Patent pending. *Features and specs are subject to change without notice.

Featuring 800 lumens of crystal-clear illumination, the Lite Pro 800 Switch (High Volt) e-bike cycling light maximizes usable output with its enhanced Maximum Optical Reflection (MOR) lens while a compact CNC-machined aluminum body is equipped with cooling fins to maximize heat dissipation. Compatible with higher-voltage e-bike inputs (12-48v), the Lite Pro draws 8 watts during operation and easily plugs into batteries from top makers including Bosch, Shimano, and Yamaha. An integrated remote switch simplifies operation while the inclusion of both an e-bike stem mount and aluminum CNC fork mount maximize the light's versatility. A 130cm power cable is included. - Max Lumens: 800 - Weight: 173g

Kryptonite's Evolution Series 4 1090 Integrated Chain is a 10mm-thick, six-sided link chain made of triple-heat-treated manganese steel for maximum strength. At 35.5-inches long, the Evolution gives you biking security in an easy-to-carry package. The links are covered with a weather-resistant nylon sleeve that protects your bike's finish, and it uses an integrated high-security cylinder that is pick, drill, and cut resistant. Three keys are included, including one that has a high-intensity LED bulb for convenient, easy unlocking in the dark. This chain has an anti-theft protection offer.

A versatile and convenient way to keep tools, supplies and technology at arms length on a PRS-33 Power Lift Repair Stand. The PRS-33TT solidly mounts directly to either side of the stand’s upright at any height. - 19 tool holding holes, slots and small trays in a variety of shapes and sizes - 14-inch (35cm) magnetic tool bar - Integrated mounting holes for PTH-1 Paper Towel Holder - Phone/tablet/clipboard holder - Pen and pencil holders - Adjustable utility hook to hang wheels, parts and scales - Height adjustable - Can be installed on a fully assembled stand

An easy-to-read mid-mounted digital gauge delivers accurate tire pressure readings up to 160psi / 11bar. Hammer type TwinHead DX5 pump head with an extra-long, tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base with ergonomic padded handle make it easy to get your ride up to pressure fast. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel - Gauge: 160 psi / 11 bar, Mid mounted flip-down digital (Tolerance: < 100psi ± 1 psi / > 100psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 318cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushion rubber for digital gauge protection, auto off, Ball / bladder heads, hose dock - Size: 68 x 25.4 x 18cm / 26.7" x 10" x 4.6" - Weight: 1.8kg / 3.97lb

- This one size fits all tubular aluminum rear rack is designed for Fat bikes with disc brakes - Adjustable rack legs fit most 24" & 26" Fat bikes - Integrated side bar provides a lower pannier attachment for more cargo on top of the rack - The MTX 2.0 QuickTrack plate is compatible with any Topeak MTX trunk bag, MTX rear basket, and most other rack packs and panniers on the market - Not compatible with asymmetric rear stay design Fat bike frames - Includes extra-long mounting bracket and rear light mount - Max weight 55lbs - 16.9 x 13.4 x 11.4" - 2.79lbs

A complete tool set to work on both Campagnolo and Fulcrum Ultra-Torque and Power Torque crank and bottom bracket systems (each sold separately). The CBP-8 includes a beefed-up bearing and crank puller and all the fittings necessary to remove and install both systems. - Bearing Puller That Fits Both Power Torque And Ultra-Torque - Crank Puller For Power Torque - Bearing Setter For Both Power Torque And Ultra-Torque - Removal Adaptor For Power Torque Crank Bearings - Removal Protection Pads For Use With Carbon Cranks - Removal Protection Adaptor For Use With Aluminum Crank Arms - Crank Removal Extension Plug For Power Torque

RockShox Dynamic Seal Grease - Recommended for rear shock service

• Use to remove air shaft and damper shaft • Reverse threaded • See RS1 Service Manual for instruction

The SRAM Pro Disc Brake Bleed Kit is designed for servicing SRAM disc brakes systems. - Kit includes 2 syringes, fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and DOT5.1 hydraulic fluid - For use with SRAM X0/ XX/ Guide/Level/Code/HydroR/G2 disc brakes - Compatible with DB-G2-R-A1, DB-G2-R-A2, DB-G2-RE-A2, DB-G2-RS-A1, DB-G2-RS-A2, DB-G2-RSC-A1, DB-G2-RSC-A2, DB-G2-ULT-A1, DB-G2-ULT-A2, DB-GDE-R-A1, DB-GDE-R-B1, DB-GDE-RE-A1, DB-GDE-RS-A1, DB-GDE-RS-B1, DB-GDE-RSC-A1, DB-GDE-RSC-B1, DB-GDE-T-A1, DB-GDE-ULT-A1, DB-LVL-A1, DB-LVL-T-A1, DB-LVL-TL-A1, DB-LVL-TLM-A1, DB-LVL-TLM-B1, DB-LVL-ULT-A1, DB-LVL-ULT-B1, DB-X0-B1, DB-XX-A2

Rack 'em! Designed to complement the clean lines of the Townie collection, the Townie rear rack adds utility while still looking great. - Original equipment replacement rear racks for Electra Townie Commute bikes - Color-matched for direct compatibility - Compatible with the Bontrager Interchange system - Max load rating is 55lbs (25kg) - Size: 700c - Material: Aluminum

Keep your bike operating as it should. Original replacement rack for Electra Townie Go! 7D. Details: - Color matched for direct compatibility - Mounting hardware not included