Filter By:
- Parts & Accessories (33)
- Wheels (4)
- Hubs (5)
- Spokes (1)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels
$19.99 - $24.99
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.
$46.49 - $60.00
Sta Tru Rear Wheels
- Single Wall rim
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Valve: Schrader
- Tire Type: Clincher
$11.25 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
$42.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option.
Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes.
- Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles.
- Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design.
- Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength.
- Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal.
- Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
- The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry.
- No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
$48.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option.
Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes.
- Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles.
- Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design.
- Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength.
- Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal.
- Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
$39.00
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button-head design, for a flush, clean look. Lightweight, easy to use, and secure.
- CNC-machined from 7000 series aluminum
- One-piece design
- Designed to fit all current Salsa thru-axle frames
- For other frames, check with the manufacturer for compatibility and other specifications
- 6 mm hex wrench required for installation
$21.95
Authentic Ritchey hub conversion kit for mountain bike hubs.
- Convert to 15mm thru-axle
- End cap conversion for Vantage and Trail non 2-piece V2 hubs for 15mm thru axle
$24.95
Conversion kits and caps sets compatible with Ritchey front hubs.
- For any Ritchey 15mm front thru-axle hub
- Replacement endcap for Phantom Flange front hubs
- Converts from 15mm TA to 9mm QR
$49.00
The Deadbolt Thru-Axles feature the classic-looking Salsa lever and can be adjusted to return to the desired position when properly tightened. Lightweight, easy to use, and secure.
- CNC-machined from 7000 series aluminum
- Designed to fit all current Salsa thru-axle frames
- For other frames, check with the manufacturer for compatibility and other specifications
$32.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling.
- Internal O-rings and grease sleeve
- High quality, sealed Cup & Cone Bearing
- High durability and smooth rolling for sustained performance
$23.00 - $30.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
$40.00
Salsa's Ti Flip-Offs are as beautiful to the touch as they are to the eye. Lightweight. Smooth. Recommended for road use or rigid front mountain bike use only. Available in a whole host of colors.
- Beautifully machined and hand-friendly
- Black, Silver, Blue, Red, Green, Orange, Purple, or Pewter
- More than just eye candy, they’re hand candy, as well
- Weight: 44g
$35.00
Race Face Vault hub axle. Use it as a replacement axle or to convert your wheel to a different axle standard.
- Light and strong alloy construction
- Compatible with Race Face Vault hubs
$35.00
The Trace rear axle fits Race Face wheels equipped with Trace hubs, like the Aeffect Wheelset. Use it as a replacement axle or to convert your wheel to a different axle standard.
- Light and strong alloy construction
- Compatible with Race Face Trace hub
$19.00 - $24.00
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
$33.00
CX-Ray 298mm Straight pull spokes fit every position of the Rise 60 (B1), 29" wheel.
- Length: 298mm
- Spoke Interface: Straight Pull
$40.95
Replacement axle and end cap for 2-piece rear disc road hubs
- Retains original 12mm thru-axle set-up
$21.95
Authentic Ritchey hub conversion kit for mountain bike hubs.
- End cap conversion for Vantage and Trail non 2-piece V2 front hubs
- Convert to 20mm thru-axle
$45.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-free 15mm thru axle system is stiff and lightweight
- Simple setup and reliable trail performance
$31.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts.
- Double contact sealing
- Super polished bearing races for low friction rolling
- 6-bolt ISO disc mounting surface
$39.00
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button-head design, for a flush, clean look. Lightweight, easy to use, and secure.
- CNC-machined from 7000 series aluminum
- One-piece design
- Designed to fit all current Salsa thru-axle frames
- For other frames, check with the manufacturer for compatibility and other specifications
- 6mm hex wrench required for installation
$34.00
Who knew we could make a thru axle disappear? The Maxle Stealth offers a light, low profile alternative to Maxle Lite.
Features
- 34g lighter than Maxle Lite
- Easy installation with a 6mm Allen wrench
$22.00
Fully connected.
Connect with your ride. Easy-to-install mounting adapters that fit a wide range of hub and spoke configurations.
Highlights:
- Easy-to-install various adapters for the Cannondale Wheel Sensor
- Compatible with Cannondale Wheel sensor
- Compatible with most hub and spoke combinations
$36.00
Salsa's Ti Flip-Offs are as beautiful to the touch as they are to the eye. Lightweight. Smooth. Recommended for road use or rigid front mountain bike use only. Available in a whole host of colors.
- Beautifully machined and hand-friendly
- Black, Silver, Blue, Red, Green, Orange, Purple, or Pewter
- More than just eye candy, they’re hand candy, as well
- Weight: 40g
$21.95
Authentic Ritchey hub conversion kit for mountain bike hubs.\
- Convert 15mm (OD) alloy axle to use a 9mm thru-axle
- End cap conversion for Vantage and Trail non 2-piece V2 hubs for QR
- Axle not included
Page 1 of 2
Next page